BJNWY - ZA-43 KIT, ZL-27A ZYGLO PENETRANT(POST 1/89

  • MSDS: BJNWY
  • Manufacturer: MAGNAFLUX CORP
  • Product Name: ZA-43 KIT, ZL-27A ZYGLO PENETRANT(POST 1/89
  • National Stock Number: 6850-00-703-7406
Product Identification

Product ID:ZA-43 KIT, ZL-27A ZYGLO PENETRANT(POST 1/89
MSDS Date:01/06/1989
FSC:6850
NIIN:00-703-7406
MSDS Number: BJNWY

Responsible Party
MAGNAFLUX CORPORATION
7300 W LAWRENCE AVE
CHICAGO, IL 60656-3504
US

Emergency Phone: 708-867-8000

Info Phone: 708-867-8000

Preparer: BRUCE C. GRAHAM

Cage: 37676

Contractor
ILLINOIS TOOL WORKS INC MAGNAFLUX DIV
GLENVIEW, IL 60025 US

Telephone: 847-657-5300/

Cage: 37676

Ingredients

WHITE MINERAL OIL

CAS: 8042-47-5

RTECS: PY8047000

Fraction By Weight: @30%


ALIPHATIC PETROLEUM SOLVENT

CAS: 8008-20-6

RTECS: OA5500000

Fraction By Weight: @10%


ISOBUTANE

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: 30%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS
Effects of Overexposure:INHALATION:DIZZINESS, NAUSEA. SKIN:IRRITATION.
DISSOLVES SKIN OILS. EYE:MILDLY IRRITATING INGESTION:GASTRIC UPSET.
Medical Cond Aggravated by Exposure:NONE

First Aid

First Aid:INHALATION:REMOVE TO FRESH AIR. SKIN:USE SOOTHING LOTION.
EYE:RINSE COPIOUSLY WITH WATER. INGESTION:CALL PHYSICIAN IF SEVERE.

Fire Fighting

Flash Point Method:PMCC
Flash Point:100F,38C
Lower Limits:1
Upper Limits:6
Extinguishing Media:CARBON DIOXIDE, FOAM
Fire Fighting Procedures:KEEP CONTAINERS COOL WITH WATER SPRAY. *DO NOT
SPRAY WATER ON BURNING ZL-27A.
Unusual Fire/Explosion Hazard:AEROSOL CANS MAY BURST AT TEMPERATURES
OVER 130F AND SPRAY OUT FLAMMABLE LIQUID.

Accidental Release

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:RESPIRATOR WITH CHEMICAL CARTRIDGE IF USING IN
POORLY VENTILATED AREA.
Ventilation:USE IN SPRAY BOOTH OR WHERE VENTILATION IS ADEQUATE TO
CARRY VAPORS AND OVERSPRAY FROM OCCUPIED AREAS.
Protective Gloves:NITRILE RUBBER GLOVES.
Eye Protection:FULL GOGGLES WHEN SPRAYING OR POURING.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
ITEM IS 4 PARTS KIT WHICH ARE AS FOLLOWS: PENETRANT, ZL-27A (REPLACES
ZL-22D) - 1 CAN; DEVELOPER, ZP-9E - 1 CAN; DEVELOPER, ZP-4B - 2
CANS; CLEANER/REMOVER, SKC-NF/ZC-7C - 4 CANS. THIS ENTRY DESCRIBES
CLEANER/REMOVER; KEY1:F1

Chemical Properties

HCC:V3
Boiling Pt:B.P. Text:44.0F,6.7C
Vapor Pres:105 PSI
Vapor Density:<1.0
pH:7
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE MOBIL LIQUID BEFORE FILLING TO AEROSOL CANS.
Percent Volatiles by Volume:35

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:ON COMBUSTION, SMOKE, SOOT, OXIDES OF
CARBON AND NITROGEN.

Disposal

Waste Disposal Methods:INCINERATE OR SEND TO WASTE DISPOSER WHO CAN
INCINERATE IT. EMPTY OUT AEROSOL CANS BEFORE DISCARDING.
PRESSURIZED AEROSOL CANS ARE NOT AN ACCEPTABLE WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.